ZFT
ZFB
ZFB Standard
Pressure-/vacuum slide valve ZFB+PAM
Flat slide valves in welded construction
VEG Standard
Pressure-/vacuum slide valve GAS+PAM
The particular advantages:
____________________
- Large variance in configuration and construction
- Short opening and closing intervals (< 2 sec)
- Fully encapsulated housing
- Dust-, gas- and pressure-tight to the atmosphere
- Cutting through standing material columns
- Ideal as a working valve
Flat slide valve in welded construction
CONSTRUCTION & FUNCTION
The Schütte welded construction flat gate valves are a further development of the common flat slide valves. They offer maximum flexibility in design and configuration and can be adapted to very specific operational requirements, in round, square or rectangular passageway, low or special construction height.
The large separation space in front area allows the gate to close against the standing material column without jamming.
Shut-off Pressure-/Vacuum
INDIVIDUALLY ADJUSTABLE
The choice of material, individually adapted to the bulk material, ensures low abrasion and wear and a long durability.
The welded construction flat slide valves can be equipped with various actuations and can be optimally adapted to your operating conditions in terms of nominal size and cross-section.
SPECIAL VERSIONS
The version of the pressure/vacuum flat slide valve GAS-HP+PAM with the inflatable “Press-Airmatic®” seal is additionally pressure- and vacuum-tight in the passage.
The SCHÜTTE welded construction flat slide valves have already proven themselves in many individual solutions.
We will be pleased to advise you!
The particular advantages:
____________________
- Large variance in configuration and construction
- Short opening and closing intervals (< 2 sec)
- Fully encapsulated housing
- Dust-, gas- and pressure-tight to the atmosphere
- Cutting through standing material columns
- Ideal as a working valve
Actuation/ Drive
- Hand wheel
- Electro-pneumatic
- Electro-pneumatic with positioner
- Electro-motoric
- Hydraulic
Options
- Intermediate positions for metering
- Ex-protection of cylinder, solenoid valve
Limit switch and junction box - Non-stick coatings
- Special flanges
- ATEX certificates on request
Technical data
| NOMINAL SIZE | DN 100 – DN 1200 |
| FLANGE | DIN PN6 -10 or ANSI 150 Lbs |
| HOUSING | Steel oder stainless steel To the materials =>> |
| GATE/DISC | Stainless steel To the materials =>> |
| SEAL | Plastics, Elastomere, Metallic To the materials =>> |
Technical data without guarantee. Customised design (voltage, power, speed, protection class, etc.) can be implemented.
Additional versions
 |
>> Knife gate valve ZFT |
 |
>> Flat slide valve ZFB |
